Industrial Powder Coating

Anti-Microbial Powder Coatings

Durable · Smooth · High-Performance Finishes

Built-in surface protection inhibits microbial growth. Sharp Coatings’ anti-microbial powder coatings incorporate advanced additives that inhibit the growth of bacteria and fungi on the coated surfaces, maintaining clean surfaces between routine cleanings. The protection is integral to the coating film and remains effective for the finish’s service life under normal use conditions.

Benefits

Built-In Anti-Microbial Protection

Incorporates silver-ion technology that helps inhibit microbial growth on coated surfaces, supporting cleaner and more hygienic environments.

Continuous, Non-Leaching Surface Action

Provides long-lasting antimicrobial performance without leaching, ensuring consistent surface protection throughout the coating's lifespan.

Durable & Scratch-Resistant Industrial Coating

Offers excellent mechanical strength and scratch resistance, maintaining surface integrity under regular use and handling.

Smooth, Easy-to-Clean Finish

Creates a smooth, non-porous surface that is easy to clean and maintain, helping reduce dirt and contaminant buildup.

Product Specs

Film thickness	50–60 μm
Curing schedule (EMT)	180°C / 10–12 min
Compatible substrates	Al, MS, CRCA
Gloss range	All gloss levels
Textures available	Smooth, textured, structured
Colour matching	RAL, Pantone, custom shades
Anti-microbial efficacy	Up to 99.99% bacterial reduction (JIS Z 2801:2010)
Pack sizes	10 kg · 20 kg
Shelf life	Up to 12 months (unopened)
Storage	Cool, dry environment below 25°C & 50% RH

Contact Expert

Request TDS

Lead-free formulation

Low VOC

Indoor optimised

Moisture-protected packing

Domestic & Export

Application Process

Surface Preparation

Clean the surface and remove oil, grease, rust, and contaminants.

Pre-Treatment

Apply suitable pretreatment to improve adhesion and corrosion resistance.

Powder Application

Apply the antimicrobial powder evenly for uniform film coverage.

Curing

Cure as recommended to achieve full coating performance and durability.

Cooling & Inspection

Cool the coated parts and inspect finish quality, film thickness, and adhesion.

Why Choose Anti-Microbial Powder Coatings

Regulatory Compliance

Tested as per JIS Z 2801:2010 standards and suitable for non-food-contact surfaces within food processing, healthcare, and public-use environments.

Where It Fits Best

Medical and laboratory equipment housings

Food processing and packaging lines (non-contact areas as per regulation

HVAC, cleanrooms, air-handling components

Public-touch surfaces: handrails, kiosks, lockers, fixtures

Appliances, electronics, and industrial enclosures

Frequently Asked Questions

Ans. The coating contains silver-ion nano additives that disrupt microbial cell growth, keeping the surface hygienic between cleaning cycles.

Ans. Yes. The active agents are built into the coating matrix, providing lifelong surface protection under normal conditions.

Ans. Yes, it’s ideal for medical, laboratory, and food-handling zones (non-direct contact areas).

Ans. Available in matte finishes with smooth or fine-textured surfaces, colour-matched to RAL / Pantone / custom palettes.

Ans. No. The coating complements cleaning routines, providing additional protection but not replacing hygiene protocols.